Servo Motor Alu Plastic Automatic Blister Packing Machine Tablet
Blister Machine
Description
- Pulling length can be adjusted. Mold is fixed by located groove so
that it's easy to change mold.
- The machine heats the PVC through heated board and forms by
compressed air frothing.
- Speed is controlled by inverter. It Adopts the interface of human
machine and PLC controller. Adopt universal feeder for feeding.
- The machine gets the function for Easy Cutting line embossing,
batch number embossing and wasted packaging material rewinding.
- Step motor is adopted on the machine for precise controlling on
pulling length and saving packing material.
- The heating molds will automatically separate when the machine
stops, which contributes to protect the packing material from
heated mould.
Specifications
Machine Model | DPP-250A |
Machine Body | Stainless Steel 304/316 |
Blanking frequency(times/min) | 15-45 |
Blister plats size | Design according to customers’ requirements |
Adjustable pulling length | 30-130mm |
Max Forming area and depth(mm) | 250*120*15 (30 need Private custom) |
Air compressor(Don't Provide) | 0.6-0.8Mpa ≥0.45m3/min |
Mould cooling | 40-80 L/h |
Power supply
(Three phase) | 380V/220V 50HZ 8KW
(According to the customer need to select the voltage) |
Wrapper specification(mm) | PVC | 260*(0.15-0.6)*(Φ400) |
Aluminum foil | 260*(0.02-0.035)*(Φ400) |
Overall Dimension(L*W*H)(including foundation) | 2900*750*1600 |
Dimension of Each Part | 1500*750*1600(front) |
1400*750*1450(back) |
Weight | About 1200kg |
Competitive Advantage
All of the air supply and synchronization of the machine is
controlled by the encoder. All synchronous
data have been programmed in advance so that there is no need to
adjust air supply and pulling time
manually. The machine in other factory use Cam control, which means
the process is mechanical.
The biggest disadvantage of it is that the friction is inevitably
which will lead to wear and tear. As time
passes, the synchronization is not accurate. But our machines use
encoder control, so that there is no
need to worry about the synchronization. If the encoder is broken,
you can also buy it in the local, it’s
convenient.
Our machine use Stepper motor to control the pulling length. When
change the model, there is no need
to adjust the machine so that it’s convenient and easy operating.
What I want to mention is that the
machines in other factory use gas clip to control the pulling
length. It has two shortcomings. First, when
you change the models, you need to adjust the pulling length
manually which means adjusting screw in
the pulling position. If the Operating workers is unskilled, it
will waste the material and time.
Our machines have PRC (print register control) system, is the
cursor version of function, because the
machine is a stepper motor, so is true of PRC system forever won't
generation shift. Other
manufacturers may be gas clip can only be manually adjusted, a long
time after the shift will occur.
